Sony LINEAR PCM RECORDER PCM-M10 Operating Instructions Manual page 23

Starting recording (automatic recording)
1
Set the REC LEVEL switch to "AUTO," and press
REC in the stop mode to enter the recording standby
z
mode.
The z REC indicator lights in red and the
indicator flashes in orange (Recording Standby mode).
When you select "AUTO," the recording level will be
adjusted automatically.
The REC LEVEL dial adjustment is enabled when you
select "MANUAL."
You can change the microphone sensitivity with the
MIC SENS(ATT) switch.
2
Turn the built-in microphones in the direction of the
source to be recorded, and press
PLAY/ENTER.
N
Recording starts. The new track will be recorded at the
end in the selected folder.
X PAUSE
PAUSE, or
X
z REC
X PAUSE
Built-in
micro-
R
L
phones
X PAUSE
N PLAY/
ENTER
23 GB