Step 3: Turning The Pcm Recorder On; Turning The Power On; Turning The Power Off - Sony LINEAR PCM RECORDER PCM-M10 Operating Instructions Manual

Step 3: Turning the PCM recorder On

Turning the power on

Slide the POWER/HOLD switch in the
direction of "POWER" for more than
1 second. The PCM recorder is turned on,
and an animation of "Accessing..." is
displayed.
16
GB

Turning the power off

Slide the POWER/HOLD switch in the
direction of "POWER" for more than
2 seconds, and an animation of "See You!"
is displayed.
Tips
z
• The PCM recorder is accessing memory
while "Accessing..." appears on the display
or the ACCESS indicator flashes. During
this time, do not remove or insert batteries
and do not disconnect or connect the AC
power adaptor, or the USB connecting cable.
Doing so may damage the data.
• Even if you do not use the PCM recorder, the
batteries are consumed slightly. When you
are not going to use the PCM recorder for an
extend period of time, it is recommended
that you turn the power off and remove the
batteries.
• When the PCM recorder remains turned on
and in the stop mode for about 10 minutes or
longer, the window display turns off
automatically and the PCM recorder enters
the sleep mode. You can operate the PCM
recorder by pressing a button.