Installing/mounting
4.1
Basic safety instructions
Wetted parts unsuitable for the process media
Risk of injury or damage to device.
Hot, toxic and corrosive media could be released if the process medium is unsuitable for the
wetted parts.
● Ensure that the material of the device parts wetted by the process medium is suitable for
Note
Material compatibility
Siemens can provide you with support concerning selection of sensor components wetted by
process media. However, you are responsible for the selection of components. Siemens
accepts no liability for faults or failures resulting from incompatible materials.
Exceeded maximum ambient or process media temperature
Danger of explosion in hazardous areas.
Device damage.
● Make sure that the maximum permissible ambient and process media temperatures of the
NOTICE
Using a device with frozen process medium
Damage to the device through ice formation.
● Prevent ice formation on the pressure transmitter. The process medium must not freeze.
SITRANS LH100 Transmitter for Hydrostatic Level
Compact Operating Instructions, 01/2019, A5E32588610-AA
WARNING
the medium. Refer to the information in Technical specifications (Page 27).
WARNING
device are not exceeded. Refer to the information in Technical specifications (Page 27).
4
13