Frame Rec - Sony HVR-Z1N Operating Instructions Manual

SETUP
G0%
7.5%
Note
b
• When [50i/60i SEL] in the
automatically.

FRAME REC

You can record pictures with a stop-motion animated effect by alternately
recording a few frames and then moving the subject a little. Operate your
camcorder using the Remote Commander to prevent camera shake.
GOFF
ON (
* A picture consists of 6 frames when [50i/60i SEL] is set to 60i, and 5 frames when it is set
to 50i.
Note
b
• When you use frame recording continuously, the remaining tape time will not be indicated
correctly.
• The last scene will be longer than other scenes.
• You cannot record index signals during frame recording.
Select to record in the system at the 0% setup level.
Select to record in the system at the 7.5% setup level.
(OTHERS) menu is set to 50i, this item is set to [0%]
Select to record in the standard recording mode.
) Select to record pictures using the FRAME REC function.
1
Select [ON], then press the dial.
2
Press MENU to hide the menu screen.
3
Press REC START/STOP.
A picture* is recorded, and your camcorder enters the
standby mode.
4
Move the subject and repeat step 3.
63
Using the Menu