Sony HVR-Z1N Operating Instructions Manual page 59

SHOT TRANS
Select this setting to set the transition duration, time, and start timer. See page 40
for details on using the shot transition function.
Note
b
• Before setting [SHOT TRANS], turn off all of the STORE/CHECK/EXEC lamps by
pressing the button repeatedly (p. 40).
TRANS TIME
Select the time that takes to make a transition from the current setting to the
selected setting.
Duration from [2.0 sec] through [15.0 sec] are available. It is set to [4.0 sec] in the
default setting.
TRANS CURVE
Select the transition curve.
The figures below show the transition curve of each mode.
*1: parameter level
*2: transition of time
LINEAR
GSOFT STOP
SOFT TRANS
START TIMER
GOFF
5 sec
10 sec
20 sec
Select to make the transition linearly.
Select to make the transition slowly at the end.
Select to make the transition slowly at the
beginning and end, and linearly in between.
Select to start the shot transition immediately.
Select to start the shot transition after 5 seconds.
Select to start the shot transition after 10 seconds.
Select to start the shot transition after 20 seconds.
*1
*2
*1
*2
*1
*2
,continued
59
Using the Menu