Recording Using Manual Adjustments; Adjusting The Iris - Sony HVR-Z1N Operating Instructions Manual
Sony operating instructions digita hd video camera hvr-z1u
Hide thumbs
Also See for HVR-Z1N:
- Service manual (482 pages) ,
- Operating instruction (68 pages) ,
- Brochure & specs (13 pages)
Table of Contents
Advertisement
Recording using
manual adjustments
You can manually adjust the iris, gain, etc.
according to the brightness of the recording
scene or in order to obtain desired effects.
Adjust the iris, gain, shutter speed, and white
balance after setting the AUTO LOCK
switch to the center position to release the
auto lock mode.
Depending on the position of the AUTO
LOCK switch, you can hold or release the
settings of these functions.
Position
Purpose
AUTO LOCK
To adjust automatically.
Center (to
To adjust manually.
release the auto
lock mode)
HOLD
Select this position after adjusting
the settings manually to retain
them.
See page 26 for details on how to adjust the
white balance.
b Note
• If you want to set the exposure intentionally to other
than a proper level, adjust the iris, gain, and shutter
speed manually.
• If you adjust only one of either iris, shutter speed, or
gain manually, you can record with iris priority,
shutter speed priority, or gain priority, respectively.
z Tip
• To adjust the brightness of pictures, set all of the iris,
gain, and shutter speed to the manual adjustment
mode, then rotate the iris dial.
Recording
Adjusting the iris
You can manually adjust the light volume
entering the lens.
As the iris is opened (smaller aperture
values), the light volume increases. The
range of focus narrows and only the subject
appears in sharp focus.
As the iris is closed (larger aperture values),
the light volume decreases and the range of
focus widens.
IRIS dial
1
During recording or in the standby
mode, set the AUTO LOCK switch to
the center position to release the auto
lock mode.
2
Press IRIS.
The current aperture value (F) appears.
3
Rotate the IRIS dial to a desired
aperture value.
The aperture value (F) varies from F1.6 to
F11, and Close, and the corresponding
value appears.
Page 28
Hide quick links:
Advertisement
Table of Contents
