Using The (Audio Set) Menu; Int Mic Set/Xlr Set, Etc; Audio Mix; Audio Output - Sony HVR-Z1N Operating Instructions Manual

Using the
SET) menu
SET, etc.
You can select the items listed below on the
AUDIO SET menu. For details on how to select
items, see "Selecting menu items" (p. 57).
The default settings are marked with G. The
indicators in parentheses appear when the
AUDIO MONI

AUDIO MIX

AUDIO OUTPUT

64
Using the Menu
(AUDIO
– INT MIC SET/XLR
You can check the sound from headphones or the camcorder speaker by selecting
either of them.
GCH1,CH2
Select to listen to the CH1 and CH2 sounds separately in the L and R
channels. However, you will hear the CH1 and CH2 sounds mixed
from your camcorder speaker.
CH1 Select to listen to the CH1 sound in channels L and R.
CH2 Select to listen to the CH2 sound in channels L and R.
CH1+CH2
Select to listen to the CH1 and CH2 sounds synthesized in channels L
and R.
You can select the sound to be output when playing back a tape on which sounds
were added afterwards (p. 98).
GCH1,CH2 Select to output only the originally recorded sound (CH1, CH2).
MIX Select to synthesize and output the originally recorded sound (CH1,
CH2) and the sound added afterwards (CH3, CH4).
CH3,CH4 Select to output only the sound (CH3, CH4) added afterwards.
Note
b
• You cannot select this item when playing back a tape recorded with [AUDIO MODE] set
to [FS48K].
You can select the audio output level to speakers, etc.
1Vrms Select to set the audio output level to 1 Vrms/FS.
G2Vrms Select to set the audio output level to 2 Vrms/FS.
setting is selected. The settings you can adjust
vary depending on the power mode of your
camcorder. The screen shows the items you can
operate at the moment. Unavailable items will
be grayed out.
AUD I O SET
RETURN
AUD I O MON I CH1,CH2
AUD I O OUTPUT
AUD I O MODE
AUD I O LOCK
AUD I O L I M I T
M I C NR
M I C SELECT
[ MENU ] : END
STBY