Sony HVR-Z1N Operating Instructions Manual page 53

DVCAM (DV) format is played back, an
equivalent picture with DVCAM (DV) format
is output regardless of [COMPONENT]
setting.
• Only video signals are output from the
COMPONENT OUTPUT jack. To output
audio signals, connect the white and red plugs
of the A/V connecting cable to the audio input
jack of your TV.
To connect the TV using the A/V
connecting cable
When there is an S video jack on the device to
be connected, connect it with your camcorder
by the S video jacks using an S video cable
(optional) instead of the yellow video plug of
the A/V connecting cable (supplied). This
connection produces pictures more faithfully on
the TV connected. The audio will not be output
when you connect with the S video cable alone.
b Note
• Be sure that you set [VCR HDV/DV] before
connecting the i.LINK cable. Otherwise, the TV
might not be able to recognize the video signal
correctly.
• Pictures in the DVCAM (DV) format are not output
from the COMPONENT OUTPUT jack, if
copyright protection signals are recorded in the
pictures.
z Tip
• If you connect your camcorder to your TV using
more than one type of cables to output the pictures
via analog jacks, the output signals have priority in
the following order:
COMPONENT OUTPUT jack t S VIDEO jack
t AUDIO/VIDEO jack
• See page 119 for details on i.LINK.
When your TV is connected to a VCR
Connect your camcorder to the LINE IN input
on the VCR using the A/V connecting cable. Set
the input selector on the VCR to LINE.
53
Playback