Using The (Camera Set) Menu; Stdyshot Typ/Frame Rec, Etc - Sony HVR-Z1N Operating Instructions Manual

Using the
(CAMERA SET) menu

– STDYSHOT TYP/FRAME REC, etc.

You can select the items listed below on the
CAMERA SET menu. For details on how to
select items, see "Selecting menu items"
(p. 57).
The default settings are marked with G. The
indicators in parentheses appear when the
WB PRESET
WB OUTDR LVL
GAIN SETUP
58
Using the Menu
Select to use the preset white balance. See page 27 for details.
When [OUTDOOR] is selected for the preset white balance, you can select the
white balance value for outdoor recording by turning the SEL/PUSH EXEC dial.
Levels from –7 (bluish) through +7 (reddish) are available. It is set to 0 (standard)
in the default setting.
Select the adjustment value for each position (H, M, and L) of the GAIN switch
(p. 29).
1
Select [H], [M], or [L] by turning the SEL/PUSH EXEC dial, then press
the dial.
2
Select an adjustment value by turning the SEL/PUSH EXEC dial, then
press the dial.
0dB, 3dB, 6dB, 9dB, 12dB, 15dB, and 18dB are available. The larger the
number, the greater the gain.
3
Select [OK] by turning the SEL/PUSH EXEC dial, then press the dial.
4
Press MENU to hide the menu screen.
setting is selected. The settings you can adjust
vary depending on the power mode of your
camcorder. The screen shows the items you can
operate at the moment. Unavailable items will
be grayed out.
CAMERA SET
RETURN
WB PRESET OUTDOOR
WB OUTDR LV L
GA I N SETUP
SHOT TRANS
COLOR CORRCT
STEADYSHOT
STDYSHOT TYP
[ MENU ] : END
STBY