Container Curtain; Figure 83. Installation Of Container Curtain - Carrier 69NT40-489-100 Series Operation And Service Manual

12.12 CONTAINER CURTAIN

WARNING
Low oxygen levels inside container. Venti-
late container before entering. Stay away
from doors while venting.
a. Installing the curtain
1. Open the rear doors of the container.
2. Fully unfold the door curtain package, and hold it up to
the container opening.
1. Rear Door
2. Upper Ribbon Channel
3. Side Ribbon Channel
4. Curtain (Poly Sheet)
1
6

Figure 83. Installation of Container Curtain

3. Standing outside the container, start at the midpoint
of the upper ribbon channel. Insert the curtain (poly
sheet) and ribbon into the ribbon channel. Finish in-
serting the curtain across the entire upper ribbon
channel.
4. Insert the curtain into the side channels, finishing the
procedure by inserting the curtain into the bottom rib-
bon channel.
Eliminate any folds or wrinkles that can lead to air
leakage. Check to be sure that the ribbon is complete-
ly inserted and the curtain is secure.
5. Place warning label on the outside of the curtain.
2
3
5
4
7
5. Bottom Ribbon Channel
6. Warning Labels
7. Ribbon
131
1
6
T-305