Stdyshot Typ - Sony HVR-Z1E Operating Instructions Manual

COLOR CORRCT
Select this setting to revise a specific color to be recorded as you desire. See
page 43 for details on using the Color Correction function.
STEADYSHOT
GON
OFF (
Note
b
• The SteadyShot function does not work well when a wide conversion lens other than VCL-
HG0872 (optional) is attached to your camcorder.
• When using VCL-HG0872, select [WIDE CONV.] in [STDYSHOT TYP] below.

STDYSHOT TYP

You can select the type of the SteadyShot function that compensates for camera-
shake. To release the SteadyShot function, select [OFF] in [STEADYSHOT] or
use the ASSIGN button assigned to the SteadyShot function (p. 87).
HARD
GSTANDARD
SOFT
WIDE CONV.
PEAKING
You can change the outline color and level for peaking.
COLOR
LEVEL
Select to activate the SteadyShot function. You can select the type of
the SteadyShot function in [STDYSHOT TYP].
)
Select to deactivate the SteadyShot function. Select when recording
using a tripod. More natural pictures are produced.
You can also deactivate the SteadyShot function by using the
ASSIGN button assigned to the SteadyShot function (p. 87).
Select to activate the SteadyShot function with stronger effect. This
mode is not recommended for recording with camera panning
technique.
Select to activate the standard SteadyShot function.
Select to activate the SteadyShot function so that it leaves a slight
unsteadiness on the picture so the picture looks natural.
Select when a wide conversion lens (optional) is attached. This mode
is the most effective with Sony VCL-HG0872 wide conversion lens.
[WHITE], [RED], [YELLOW] are available for the outline color. It is
set to [WHITE] in the default setting.
[HIGH], [MIDDLE], [LOW] are available for the outline level. It is
set to [MIDDLE] in the default setting.
,continued
61
Using the Menu