Sony HVR-Z1E Operating Instructions Manual page 101

7
Press x (stop) when you want to stop
recording.
b Note
• You can only record additional audio on a tape
recorded on your camcorder. The sound may
deteriorate when you dub audio on a tape recorded
on other camcorders (including other HVR-Z1E/
Z1P camcorders).
z Tip
• You can adjust the recording volume of additional
audio manually.
Checking and adjusting the
recorded sound
1
Play back the tape on which you have
recorded audio following the
procedures in "Recording sound"
(p. 100).
2
Press MENU.
3
Select the (AUDIO SET) menu by
turning the SEL/PUSH EXEC dial,
then press the dial.
4
Select [AUDIO MIX] by turning the
SEL/PUSH EXEC dial, then press the
dial.
5
Turn the SEL/PUSH EXEC dial to
select the sound to be output, then
press the dial.
Setting To
MIX synthesize the original sound
(CH1, CH2) with the added
sound (CH3, CH4) to be output
CH3, CH4 output the added sound (CH3,
CH4) only
6
Press MENU to hide the menu screen.
101
Dubbing/Editing