Audio Mix; Audio Output - Sony HVR-Z1E Operating Instructions Manual

Using the
SET) menu
– INT MIC SET/XLR
SET, etc.
You can select the items listed below on the
AUDIO SET menu. For details on how to select
items, see "Selecting menu items" (p. 58).
The default settings are marked with G. The
indicators in parentheses appear when the
AUDIO MONI
You can check the sound from headphones or the camcorder speaker by selecting
either of them.
GCH1,CH2
CH1
CH2
CH1+CH2

AUDIO MIX

You can select the sound to be output when playing back a tape on which sounds
were added afterwards (p. 99).
GCH1,CH2
MIX
CH3,CH4
b
• You cannot select this item when playing back a tape recorded with [AUDIO MODE] set
to [FS48K].

AUDIO OUTPUT

You can select the audio output level to speakers, etc.
1Vrms
G2Vrms
(AUDIO
Select to listen to the CH1 and CH2 sounds separately in the L and R
channels. However, you will hear the CH1 and CH2 sounds mixed
from your camcorder speaker.
Select to listen to the CH1 sound in channels L and R.
Select to listen to the CH2 sound in channels L and R.
Select to listen to the CH1 and CH2 sounds synthesized in channels L
and R.
Select to output only the originally recorded sound (CH1, CH2).
Select to synthesize and output the originally recorded sound (CH1,
CH2) and the sound added afterwards (CH3, CH4).
Select to output only the sound (CH3, CH4) added afterwards.
Note
Select to set the audio output level to 1 Vrms/FS.
Select to set the audio output level to 2 Vrms/FS.
setting is selected. The settings you can adjust
vary depending on the power mode of your
camcorder. The screen shows the items you can
operate at the moment. Unavailable items will
be grayed out.
AUD I O SET
RETURN
AUD I O MON I CH1,CH2
AUD I O OUTPUT
AUD I O MODE
AUD I O LOCK
AUD I O L I M I T
M I C NR
M I C SELECT
[ MENU ] : END
STBY
,continued
65
Using the Menu