Sony HVR-Z1E Operating Instructions Manual page 12

4
While pressing the battery back down,
slide it in the direction of the arrow.
The charge lamp lights up and charging
starts.
When the battery was successfully
charged
The battery mark on the display window will
light up in the shape of a full battery (
indicates that the battery has been sufficiently
charged for use.
If you continue charging until the CHARGE
lamp turns off and FULL appears on the display
window, the battery has now been fully charged
and can be used for a little longer period.
Remove the battery pack from the AC Adaptor/
charger.
To attach the battery pack to the
camcorder
Press the battery pack and slide it down.
To remove the battery pack
1
Set the POWER switch to OFF.
12
Getting started
2
Press BATT RELEASE and slide the
battery pack up.
To check the remaining battery – Battery
Info
) that
You can check the battery's current charge level
and its current remaining recording time when
the power is turned off. The remaining
recording time in the selected recording format
appears.
1
Set the POWER switch to OFF.
2
Open the LCD panel and adjust the
angle.
3
Press DISPLAY/BATT INFO.
The battery information appears for about
7 seconds.
Keep the button pressed to view it for about
20 seconds.
BATTERY CHARGE LEVEL
0%
A Battery charge level: Displays
approximate remaining amount of
power left in the battery pack.
B Possible recording time using the LCD
panel.
BATTERY INFO
50% 100%
REC T I ME AVA I LABLE
LCD SCREEN: 1 0 5
min
V I EWF I NDER: 1 1 5
min