Table of Contents
Advertisement
Storing the Scene File to the Memory Stick (Refer to step 1 of Fig. 5-3.)
The scene file group (five scene files) stored in the camera unit is stored to the memory stick.
(1) Set the setup menu as follows, and set the number of the scene file group to be stored.
(2) Set the setup menu as follows, and write comments to the scene file group to be stored.
(3) Set the setup menu as follows.
Reading the Scene File from the Memory Stick (Refer to step 3 of Fig. 5-3.)
The scene file group (five scene files) stored in the memory stick are read to the memory of camera unit.
(1) Set the setup menu as follows, and select the number of the scene file group to be read.
(2) Set the setup menu as follows.
n
When the power is just turned on, the reference files stored in the memory stick will not be read. This file
will only be read when READ is executed at the setup menu.
Camera unit
Current paint data
Output to hardware
Fig. 5-3. Operating Procedure for Scene Files
HDW-F900 P1E2
Storing
(Step 1)
Scene File
Calling
(Step 2)
Storing in
memory stick
(Step 1)
Readng from
memory stick
(Step 3)
5-4. Registering Reference Files
Memory stick
5-5
Advertisement
Table of Contents
