Table of Contents
Advertisement
6-1-4. Cleaning of Stationary Heads and Cleaning Blade
c
The edge of the cleaning blade is very sharp and may hurt your fingers. Avoid touching the edge when
cleaning.
Tools
. Cleaning cloth : 3-184-527-01
. Cleaning fluid : 9-919-573-01
Procedure
1. Clean the tape running surfaces (shaded portion) of the FE, CTL, CUE/TC heads and the cleaning
blade of the FE head by wiping them in the vertical direction using a cleaning cloth moistened with
cleaning fluid.
m
. Be careful not to damage the surfaces of the stationary heads.
. Remove magnetic particles completely from the head gaps of the FE, CTL and CUE/TC heads.
Otherwise, they may cause recording and playback errors.
2. After cleaning, be sure to wipe off moisture using a dry cleaning cloth.
Cleaning blade
FE head
HDW-F900 P1E2
CTL head
6-1. Cleaning
CUE/TC head
6-5
Advertisement
Table of Contents
