Canon Laser Shot LBP-2410 Getting Started Manual page 5

Installation Space
Secure space around the printer as shown below, and install the printer on a
platform that can tolerate the weight sufficiently. The dimensions of each
section, required peripheral space, foot position, and installed height are shown
in the figure.
Dimensions of the Printer
Required Peripheral Space
987
208 328
Foot Position
78
78
(mm)
(mm)
279 94
319 54
(mm)
System Requirements
Operating system software environment
• Microsoft Windows 98/Me
• Microsoft Windows 2000/XP
System Requirements (minimum required)
Windows 98/Me
Pentium 300 MHz or higher
CPU
64 MB or more
Memory (RAM)
Hard Disk 20 MB or more
System Requirements (recommended)
Windows 98/Me
PentiumIII 600 MHz or higher
CPU
Memory (RAM) 64 MB or more
Interface Environment
When connecting by USB
• Windows 98/Me: USB Full-Speed (USB1.1 equivalent)
• Windows 2000/XP: USB 2.0 Hi-Speed/USB Full-Speed (USB1.1 equivalent)
When connecting to a network (Requires an optional network board)
• Connector: 10Base-T or 100Base-TX
• Protocol: TCP/IP, NetBIOS/NetBEUI (TCP/IP only for Windows XP)
NOTE
When using Sound, PC synthesizer (and the driver for PCM synthesizer)
must be installed. Do not use a PC Speaker driver (such as speaker.drv).
Windows 2000/XP
Pentium 300 MHz or higher
Windows 2000: 64 MB or more
Windows XP: 128 MB or more
15 MB or more
* PC/AT compatibles
Windows 2000/XP
PentiumIII 600 MHz or higher
Windows 2000: 128 MB or more
Windows XP: 256 MB or more
5