This printer feeds paper only from the multi-purpose tray by factory
default. When the optional 250-sheet paper feeder is installed, paper can
be fed from two paper sources.
This section describes only the procedure for loading plain paper in the
multi-purpose tray. When loading paper other than plain paper or using
the optional 250-sheet paper feeder, refer to the following sections.
G When loading transparencies or envelopes in the multi-purpose tray,
See Chapter 2 "Load and Output of the Paper" in the User's Guide.
G When installing the optional 250-sheet paper feeder, See "Installing the 250-
sheet Paper Feeder," on p. 31.
G When loading paper in the cassette of the optional 250-sheet paper feeder,
See "Loading Paper in the Paper Cassette," on p. 35.
Loading Paper in the Multi-purpose Tray
Up to approximately 125 sheets of paper (64 g/m
215.9 mm and length of 127.0 to 355.6 mm can be loaded in the multi-purpose
tray. Paper that cannot be loaded in the paper cassette such as transparencies
and envelopes can be loaded in the multi-purpose tray.
) with a width of 76.2 to
Open the multi-purpose tray.
Hold the grip at the center of the front surface of the printer.
Pull out the auxiliary tray.
Be sure to pull out the auxiliary tray when loading paper in the