Technical Data - Bosch GML 50 Professional Original Instructions Manual

Hide thumbs Also See for GML 50 Professional:
Table of Contents

Advertisement

Available languages

Available languages

OBJ_BUCH-1267-003.book Page 17 Monday, March 16, 2015 12:17 PM

Technical Data

Radio Charger
Article number
Back-up batteries
Weight according to EPTA-Procedure 01/2003
Protection class
Degree of protection
Permitted ambient temperature
– during charging
– during operation*
– during storage
Recommended batteries
Audio Operation/Radio
Operating voltage
– for mains operation
– for battery operation
Rated output of amplifier (for mains operation)
Reception angle of remote control
Reception range
– FM
– AM
1)
Supported file formats
Battery Charger
Battery charging voltage (automatic voltage detection)
Charging current
Allowable charging temperature range
Charging time for battery capacity, approx.
– 1.3 Ah
– 4.0 Ah
Number of battery cells
Remote Control
2)
Working range
Battery
* Limited performance at temperatures <0 °C
1) (for SD/MMC card or USB audio source)
2) The working range can be decreased by unfavourable environmental conditions (e.g. direct sun irradiation).
Technical data determined with battery from delivery scope.
Assembly
Power Supply of the Radio Charger
The power supply of the radio charger can take place via the
mains supply or via a lithium ion battery inserted in the charging
compartment 22. When the battery is used for power supply,
only the functions audio operation and power supply of exter-
nal devices via the integrated USB connection, are available.
 Observe the mains voltage! For power supply via mains,
the voltage of the power source must correspond with the
data on the type plate of the radio charger. Radio chargers
marked with 230 V can also be operated with 220 V.
Bosch Power Tools
kg
IP 54 (dust and splash water protected)
°C
°C
°C
GBA 14,4 V .../GBA 18 V ...
V
V
W
°
MHz
kHz
V=
A
°C
min
min
m
Battery Insertion/Removal (see figure A)
Note: Use of batteries not suitable for the radio charger can
lead to malfunctions of or cause damage to the radio charger.
Open locking latch 23 of the battery lid ("Charger/Battery
Bay") and fold out battery lid 24.
Insert a battery into the charging compartment 22 in such a
manner that the connections of the battery face against the
connections in the charging compartment 22, and allow the
battery to engage in the charging compartment.
As soon as a battery with sufficient volt-
age is inserted, the battery inserted in-
dicator l appears on the display.
English | 17
GML 50
3 601 D29 6..
2 x 1.5 V (LR06/AA)
11.2
/I
0...+45
0...+45
–20...+50
230/110
14.4–18
50
110
87.5–108
531–1602
MP3, WMA
14.4–18
0.9
0–45
120
400
4–10
7
1 x 3 V (CR2032)
1 609 92A 11A | (16.3.15)

Advertisement

Table of Contents
loading

Table of Contents