Installation I Safety Strap - ADJ SABER SPOT GO User Instructions

Saber Spot GO
Fixtures should be mounted using a mounting clamp (not included), affixing it to the mounting
bracket that is provided with the unit. Always ensure that the fixture is firmly fixed to avoid vibration
and slipping while operating. Always ensure that the structure to which you are attaching the unit is
secure and is able to support a weight of 10 times the unit's weight. Also, always use a safety cable
(not included) that can hold 12 times the weight of the unit when installing the fixture.
The equipment must be installed by a professional, and it must be installed in a place where it is out
of the reach of people's grasp.
Hanging Bracket
NOTE: This unit comes with 2 velcro safety straps. It is highly suggested that both straps are used to
properly secure the unit.
Velcro Strap
ADJ Products, LLC - www.adj.com - Saber Spot GO User Manual Page 8
Mounting Clamp
(Not Included)
Installation
Safety Cable
(Not Included)
Velcro Strap