Step 3: Charging The Battery Pack - Sony Handycam HDR-FX7 Operating Instructions Manual

Step 3: Charging the battery pack

You can charge the battery by
attaching the "InfoLITHIUM" battery
pack (L series) to your camcorder.
b Note
• You cannot use batteries other than the
"InfoLITHIUM" battery pack (L series)
(p. 108).
DC plug
AC Adaptor
1
Press the battery pack and slide it
down.
18
DC IN jack
To the wall
outlet
Power cord
2
With the B mark on the DC plug
facing the cassette compartment,
connect the AC Adaptor to the DC
IN jack on your camcorder.
3
Connect the power cord to the AC
Adaptor.
4
Connect the power cord to the
wall outlet.
5
Set the POWER switch to OFF
(CHG).
The CHARGE lamp lights up and
charging starts.
B mark