Assigning The Functions To The Assign Buttons - Sony Handycam HDR-FX7 Operating Instructions Manual

Changing the settings of your
camcorder recordings (Continued)
To reset the picture profile settings
You can reset the picture profile settings by
each picture profile number. You cannot
reset all picture profile settings at once.
1 Press the PICTURE PROFILE button
C.
2 Select the picture profile by turning the
SEL/PUSH EXEC dial A, then press
the dial.
3 Select [SETTING] t [RESET] t
[YES] t [
the SEL/PUSH EXEC dial A.
42
RETURN] t [OK] by
Assigning the
functions to the
ASSIGN buttons
You may need to assign some functions to
the ASSIGN buttons. You can assign a
single function to each the ASSIGN button
1 to 6.
Functions you can assign to the
ASSIGN buttons
• MARKER (p. 66)
• D.EXTENDER (p. 63)
• FOCUS INFNTY (p. 43)
• REC REVIEW (p. 44)
• END SEARCH (p. 44)
• INDEX MARK (p. 44)
• PEAKING (p. 65)
• STEADYSHOT (p. 60)
• COLOR BAR (p. 60)
• SPOTLIGHT (p. 63)
• BACK LIGHT (p. 62)
• FADER (p. 63)
• DISPLAY (p. 47)
• Picture profile (p. 39)
• SHOT TRANS (p. 45)
b Note
• The ASSIGN buttons 4 to 6 are exclusively used
for memory playback when the POWER switch
is set to VCR, and cannot be used as ASSIGN
buttons. You cannot assign functions to the
ASSIGN buttons 4 to 6 while the POWER
switch is set to VCR.