Sony Handycam HDR-FX7 Operating Instructions Manual page 41

Item Adjustment
[PROFILE To name the set picture
NAME] profiles [PP1] through
[PP6] (p. 39)
[COPY] To copy a picture profile
setting to other picture
profiles
[RESET] To restore the default
setting of the picture
profile
6 Repeat steps 4 and 5 to adjust other
items.
7 Select [ RETURN] by turning the
SEL/PUSH EXEC dial A, then press
the dial.
8 Select [OK] by turning the SEL/PUSH
EXEC dial A, then press the dial.
A picture profile indicator appears.
b Note
• In the case of [TYPE3] of [SKINTONE
DTL], the effect may also be applied to a
color that is not a skin color.
To check the picture profile settings
During recording or standby, press the
STATUS CHECK button B (p. 47).
z Tip
• You can assign picture profiles to the ASSIGN
buttons and use them to turn the picture profiles
on and off (p. 42).
To name the picture profile settings
You can name on picture profile 1~6.
1 Press the PICTURE PROFILE button
C.
2 Select the picture profile that you want
to name by turning the SEL/PUSH
EXEC dial A, then press the dial.
3 Select [SETTING] t [PROFILE
NAME] by the SEL/PUSH EXEC dial
A.
4 Select a letter by turning the SEL/PUSH
EXEC dial A, then press the dial.
Repeat this operation until a complete
name is entered.
PICT. PROFILE
P I CTURE PROF I LE
z Tips
• Each name can be up to 12 characters long.
• Characters that can be used in profile
names:
• A~Z
• 0~9
• - _ / # & : . @
5 Select [OK] by turning the SEL/PUSH
EXEC dial A, then press the dial. The
profile name is changed.
RETURN] t [OK] by the
6 Select [
SEL/PUSH EXEC dial A.
To copy the picture profile setting to
other picture profiles
1 Press the PICTURE PROFILE button
C.
2 Select the picture profile that you want
to copy from by turning the SEL/PUSH
EXEC dial A, then press the dial.
3 Select [SETTING] t [COPY] by SEL/
PUSH EXEC dial A.
4 Select the number of the picture profile
that you want to copy to by turning the
SEL/PUSH EXEC dial A, then press
the dial.
5 Select [YES] by turning the SEL/PUSH
EXEC dial A, then press the dial.
6 Select [ RETURN] t [OK] by the
SEL/PUSH EXEC dial A.
CANCEL
OK
END
41
Continued ,