Table of Contents
Advertisement
OPERATING PROCEDURES
1. Ensure that the base unit power switch is in the "OFF" position.
2. Set fusion wand in the docking cradle.
3. Turn power switch to "ON" position. The LCD touchscreen will illuminate
4. Remove fusion wand from docking cradle. The system automatically powers up and
defaults to the CH0 settings (CH0 is NOT a preset channel and has no memory
storage but it can be manually changed to any combination of settings). Using the
select button on the fusion wand will toggle through Channels 1-3 presets.
5. When the Display temperature reaches the desired Set temperature, the heating
indicator light / symbols (sunlight icon) will flicker & flash, then maintain the set
temperature. The unit is now ready for normal operation.
CHANNEL PROGRAMMING
Turn on the power switch at the back of the repair station.
The default setting during power up is CH0. Any combination of airflow and
temperature can be selected by adjusting the appropriate settings with the up/down
keys on the touch screen.
The pre-programmed settings are factory set for selections CH1-CH3. To select
between the Channels, press the green button on the wand handle. Depressing the
button repeatedly will cycle to the next channel.
Faster. Smarter. Better.
**From any preset CH setting, just tap the
adjust temperature arrows and the CH0
'default' activates and remains the default
channel for temperature control unless a
channel preset is again activated by pressing
the white button.
6
Advertisement
Table of Contents
