Step 2: Turning The Power On, And Setting The Date And Time - Sony Handycam HD-CX520 Operating Manual

Step 2: Turning the power on, and setting the
date and time
1
Open the LCD screen of your camcorder.
The lens cover is opened and your camcorder is turned on.
To turn on your camcorder when the LCD screen is open, press POWER.

POWER button
2
Select the desired geographical area with
Touch the button on the
LCD screen.
To set the date and time again, touch

[GENERAL SET] category)  [CLOCK SET]. When an item is not on the screen, touch
until the item appears.
3
Set [DST SET] or [SUMMERTIME], date and time, then touch
The clock starts.
If you set [DST SET] or [SUMMERTIME] to [ON], the clock advances 1 hour.

The date and time does not appear during recording, but they are automatically recorded on the

recording media, and can be displayed during playback. To display the date and time, touch
(MENU)   [PLAYBACK SET] (under
[DATE/TIME] 
You can turn off the operation beeps by touching

(MENU) 
 
.
MODE button
(Movie): To record movies
(Photo): To record photos
/ , then touch [NEXT].
 [CLOCK/
[PLAYBACK] category)  [DATA CODE] 
(MENU)   [SOUND/DISP SET]
LANG] (under
/
.
US
1