Video Status Screen; Button/Remote Status Screen - Sony HANDYCAM PMW-EX1R Operating Instructions Manual

VIDEO Status Screen

The information on video formats and settings for
the COMPONENT OUT, SDI OUT, HDMI
OUT, A/V OUT and i.LINK connectors is
displayed.
VIDEO
V i deo Format : 1920/60i
Rec Mode : HQ
Ou t p u t Selec t : 1920/60i
A/V Out : Off
Down Conver ter : Squeeze
i . L I NK I / O : D i sab l e
Video Format: Video format setting
The video format set in "Video Format" of the
OTHERS menu is displayed.
In HD Mode, the horizontal resolution, frame
rate, and scan format are displayed.
In SD Mode, the frame rate, scan format, and
aspect (SQ/EC) are displayed.
Rec Mode: Recording bit rate (HD Mode only)
The bit rate (HQ or SP) of the video format set in
"Video Format" of the OTHERS menu is
displayed.
Output Select: Component and digital output
status
The video format of the signal being fed from the
COMPONENT OUT, SDI OUT, and HDMI
OUT connectors according to the "Output Select"
setting of the VIDEO SET menu is displayed.
Video Out: Output status of the A/V OUT
connector
The format (NTSC or PAL) of the analog
composite signal being fed from the A/V OUT
connector is displayed when "Output Select" of
the VIDEO SET menu is set to "Composite."
When the "Output Select" setting is other than
"Composite," "Off" is displayed.
Down Converter: Down-converter setting of the
SD output (HD Mode only)
The "Down Converter" setting (Squeeze, Edge
Crop, Letterbox) of the VIDEO SET menu is
displayed.
i.LINK I/O: i.LINK I/O status
The i.LINK I/O setting (HDV/DVCAM/Disable)
of the OTHERS menu is displayed.
112 VIDEO Status Screen / BUTTON/REMOTE Status Screen
BUTTON/REMOTE Status
Screen
The functions assigned to the assignable buttons
and the status of the IR Remote Commander are
displayed.
BUTTON / REMOTE
Ass i gn But ton 1 : Freeze M i x
3 / 5
I R Remote
Assign Button: Assignable button statuses
The functions assigned with the "Assign Button"
of the OTHERS menu to the respective
assignable buttons are displayed.
IR Remote: IR Remote Commander status
The status (On: enabled, Off: disabled) of the IR
Remote Commander is displayed
2 : O f f
3 : O f f
4 : Rec Rev iew
: On
4 / 5