Displaying The Markers And Zebra Patterns; Displaying The Markers - Sony HANDYCAM PMW-EX1R Operating Instructions Manual

HD V/D
V
BA TT
ER Y
RE LE
AS E
SD I OU
T
WHT BAL
SHUTTER
ASSIGN 4 OFF ON
During adjustment, an in-progress message is
displayed on the screen. When the adjustment is
completed successfully, the message changes to a
completion message, and the obtained color
temperature is displayed.
• When you execute the adjustment in a memory
mode, the adjusted value is stored in memory
(A or B) selected in step 1.
• When you execute the adjustment in ATW
mode, adjustment in ATW is resumed.
If auto white-balance adjustment fails
An error message is displayed on the screen for
approximately three seconds.
If the error message is displayed, try auto white-
balance adjustment again.
If the error message continues to be displayed
after several attempts, consult your Sony service
representative.

Displaying the Markers

and Zebra Patterns
During recording, various markers and zebra
patterns can be inserted into the image on the
LCD monitor/EVF screen.
This does not affect recording signals.
Displaying the Markers
WHT BAL button
Use "Marker" of the LCD/VF SET menu.
Press the MENU button to set the camcorder to
Menu mode, display the LCD/VF SET menu with
00:00
Activating the marker indications
• Set "Setting" to "On" then turn the markers on/
• Assigning the Marker on/off function to one of
For the assignable buttons, see "Changing
Functions of the Assignable Buttons" on page 70.
Displaying the safety-zone marker
Set "Safety Zone" to "On" to insert the safety-
zone marker to the screen.
With "Safety Area" you can select the size of the
safety-zone marker from among 80%, 90%,
92.5%, and 95% of the picture area.
, and select "Marker" from the menu.
LCD/VF SET
B
LCD Set t i ng
B
EVF Safet y Zone
B
Peaking Safet y Area
B
Marker Center Marker
B
Zebra Aspec t Marker
B
D i splay On/O f f Aspec t Select
off independently.
No marker is displayed when "Setting" is "Off."
the assignable buttons permits you to operate
"Setting: On/Off" by pressing the button.

Displaying the Markers and Zebra Patterns

: On
: On
: 90%
: On
: On
: 4 : 3
49