Color Temperature; Video Format; Number Of System Lines - Sony HANDYCAM PMW-350K Operating Instructions Manual

g Wireless receiver reception level
When a wireless receiver is installed in the
camcorder, "W" appears together with four
segment reception level indicators for each of the
channels (1 to 4) that can be used by the receiver.
The indications are as follows.
In normal situation: The number of white
segments indicates the strength of the signal
level.
Muting (for an analog receiver) or error rate
aggravation (for a digital receiver): The
number of gray segments indicates the
strength of the signal level.
h Battery remaining/voltage capacity
The following is displayed depending on the type
of power source.
Type of power What is displayed
source
InfoLithium Remaining battery capacity icon
battery and remaining recording time
Anton Bauer Remaining battery capacity (%
battery indication)
Other type than Input voltage
above
i External power input
Appears when power is supplied from an external
power source connected to the DC IN connector.
j Color temperature
Displays a color temperature calculated from the
gain of R and B, in the range 1.5 K to 50.0 K (in
steps of 0.1 K). The +/– signs may be displayed
depending on the Offset White setting (see
page 92).
No display: Offset White is OFF
+: The value of Offset White is greater than
3200K.
–: The value of Offset White is less than 3200K.
k Number of system lines
Indicates the number of system lines (1080/720/
576/480) of video currently being recorded or
played back.
l Video format
Indicates the format of video being currently
played back or recorded (see page 50).
The video aspect ratio (16:9 or 4:3) can also be
displayed when the recording format is set to
DVCAM.
30 Viewfinder Screen Display
m Depth of field indication (when the
serial lens is mounted)
Error/warning indication
A bar indicates the depth of field.
An error or warning message is displayed here
depending on the situation.
n Special recording mode indication
The following is displayed when the camcorder is
in a special recording mode.
• Frame Rec (Frame Recording mode)
• Interval Rec (Interval Recording mode)
• S&Q Motion (Slow & Quick Motion mode)
o Special recording mode settings
indication
Appears when the camcorder is in a special
recording mode.
Bottom of viewfinder screen
a TLCS iris control mode
The following icons are displayed to indicate the
video level control modes based on the Total
Level Control System (TLCS).
Icon TLCS control mode
Backlight mode
Standard mode
STD STD
Spotlight mode
b Focus adjustment mode (when the auto
focus lens is mounted)
Indicates the current focus adjustment mode of
the camcorder.
• AF (Auto Focus mode)
• MF (Manual Focus mode)