Table of Contents
Advertisement
IMPORTANT SAFEGUARDS
For use with distiller Model No. W3000 Series
•
Read all instructions before using.
•
Use electricity safely and wisely, and observe safety precautions when
using your distiller.
•
Be sure power and fan switches are OFF before plugging power cord into
outlet.
•
Make sure gasket, boiling chamber and lid are properly secured before
the distiller is plugged in (see instructions). No part of the distiller should
be removed during the distillation cycle or until the distiller has completely
cooled. Scalding could occur.
•
Plug distiller into a household grounded outlet ONLY. The cord has a
three prong plug which mates with a standard three prong grounded
wall outlet.
If there is any doubt as to whether the outlet is properly grounded, check
with a licensed electrician.
•
Do not let cord touch hot surfaces or hang over the edge of a countertop,
tabletop, or other surface areas.
•
Do not use your distiller if it or its cords are damaged or not working
properly. Contact your authorized distributor for examination and/or repair.
•
The distiller, its cords and plugs should not be used outdoors or immersed
in liquids.
•
Do not touch distiller when it is hot.
•
Distiller should always be unplugged and allowed to cool completely
before cleaning.
•
This appliance is not intended for and should not be used by children or
distiller operation to ensure proper safety.
•
Do not distill salt water as this will damage certain distiller components
and void the warranty.
•
Use your distiller only for the use described in this booklet. Do not use
attachments with your distiller unless recommended by your authorized
distributor.
SAVE THESE INSTRUCTIONS
3
Advertisement
Table of Contents
