Table of Contents
Advertisement
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE
Distiller will not
POWER switch is not
operate.
in the ON position.
Boiling chamber not
mounted on lift spring
bracket.
Storage reser voir is full.
Float in reservoir is in
the UP position.
Boiler tank does
POWER switch is not in
not ll with
the ON position.
water.
Water connection is not
open.
Inlet water valve is
plugged.
FAN switch is not in the
Fan does not
ON position.
operate.
Boiling chamber is not
mounted on lift spring
bracket.
SOLUTION
Make sure that the POWER
switch is in the ON position
and that the unit is plugged
into the wall outlet. Page 5
Remount boiling chamber.
Page 12
Distiller will operate once a
change in water level is
detected. Page 15
Draw su cient water out
of the r eservoir to activate
the oat switch.
Make sure that the oat
rod is not lodged in its
recessed shipping position.
Page 5
Make sure that the POWER
switch is in the ON position
and that unit is plugged
into the wall. Page 5
Open water connection.
Page 14, step 8
Clean inlet valve and
elbow. Page 17
Make sure that the F AN
switch is in the ON position.
Remount boiling chamber .
Page 12
18
Advertisement
Table of Contents
