[MONOTONE]
When fading in, the picture gradually changes
from black-and-white to color.
When fading out, the picture gradually changes
from color to black-and-white.
1
Slide the POWER switch to select the
CAMERA mode.
2
Touch
to display [PAGE1] in
the standby mode (to fade in) or during
recording (to fade out).
3
Touch [FADER].
60min
STBY
0:00:00
FADER
OFF
OK
WHITE
BLACK
MOSC.
MONO–
FADER
TONE
4
Touch the desired effect, then touch
.
5
Touch
.
60min
STBY
0:00:00
BLACK
FADER
FN
6
Press REC START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the operation
In step 3, touch [
OFF].
b Note
• You cannot use the FADER function together with:
– Tape photo recording
– [FRAME REC] (Frame recording)
– [INT.REC] (Interval recording)
Searching for the
starting point
Searching for the last scene of the
most recent recording
– END SEARCH
This function is handy when you have played
back the tape, for example, but want to start
recording right after the most recently
recorded scene. When you use a cassette
without Cassette Memory, the END
SEARCH function will not work once you
eject the cassette after you have recorded on
the tape. If you use a cassette with Cassette
Memory, it will function even when you have
ejected the cassette.
1
Slide the POWER switch to select the
CAMERA mode.
2
Touch
to display [PAGE1].
3
Touch [END SCH].
The last scene of the most recent recording
is played back for about 5 seconds, and the
camcorder enters the standby mode at the
point where the last recording has finished.
POWER switch
,continued
33
Recording