Table of Contents
Advertisement
Chapter 5 Application Examples
5.1 Application configuration
You can create a new application on this page, mainly used for defining the method to decode
the data sent from end-device.
The configuration procedures are listed as below.
1. Go to "LoRaWAN" > "Network Server" > "Application".
2. Click
to enter the configuration page, as the following picture shows：
Application Configuration
Item
Description
Enter the name of the application profile.
Name
E.g Smoker-sensor-app.
Enter the description of this application.
Description
E.g a application for smoker sensor.
Select from: "None", "Cayenne LPP", "Custom".
None: This mode enables devices not to encode data.
Cayenne LPP: This mode enables devices to encode
Payload Codec
data with the Cayenne Low Power Payload (LPP).
Custom: This mode enables devices to encode data
with the decoder function and the encoder function
which you have entered the code.
UG87-LW User Guide
Default
None
114
Advertisement
Table of Contents
