Stop; Stop Reset; Upwards; Format - ALGE-Timing Timy Commander Manual

3.12.1.1.2

STOP:

The indicated time will be counted up and will stop at zero. In order to start the time once
again, press the button
The Timy will ask you "Reset, <F0> and <F1> = YES or <F2> and <F3Y = NO".
3.12.1.1.3

STOP RESET

After expiration of the countup (zero), the time will reset to the zero and stops there. You can
start the next count up by pressing
3.12.1.1.4

UPWARDS

After the count up finished, the time counts down.
3.12.1.2

Format

SSSSSS ...................... Count up of second only (up to 6 digits)
HHHH:MM:SS ............. Count up of hours (up to 4 digit), minutes and seconds
DDDD:HH:MM:SS ....... Count up of days (up to 4 digit), hours, minutes and seconds
MM:SS + SIGNAL ....... Count up in minutes and seconds with a horn output
3.12.1.3

Timeout

Here you can adjust if you would like to stop the Count up time with the push button
(ALGE Code: 023-xx) or with the button
If you press the button
3.12.1.4

Interval

You can adjust a fix countdown time. The time range is as adjusted in "Format". This function
works only in the program CIRCLE and STOP RESET.
3.12.1.5

Interval 2

If you adjust an Interval 2 time it will Count up this time after the time adjusted in interval is
elapsed. The time range is as adjusted in "Format". This function works only in the program
CIRCLE and STOP RESET.
3.12.1.6

Interval 3

f you adjust an Interval 2 time it will Count up this time after the time adjusted in interval is
elapsed. The time range is as adjusted in "Format". This function works only in the program
CIRCLE and STOP RESET.
3.12.1.7

GAZ-address

If several display boards are connected together, you can control each one with the GAZ-
address.
3.12.1.8

Board

Select how many digits your display board has (6 digits or 8 digits).
3.12.1.9

Only Channel 0

Adjust if you use only timing channel 0 (start) or channel 0 (start) and 1 (stop).
Timy
Commander
. If you would like to reset the time, press the button
.
.
, the time will continue to Count up.
-18-
.