To Bury The Boundary Wire Or The Guide Wire; To Change The Position Of The Boundary Wire Or The Guide Wire; To Extend The Boundary Wire Or The Guide Wire; To Install The Wheel Brushes - Husqvarna Automower 535 AWD Operator's Manual

Hide thumbs Also See for Automower 535 AWD:
Table of Contents

Advertisement

Note: The wire is overgrown with grass and not
visible after a few weeks.
3.6 To bury the boundary wire or the
guide wire
Cut a groove in the ground with an edge
cutter or a straight shovel.
Put the boundary wire or the guide wire 1-20
cm / 0.4-8 in. into the ground.
3.7 To change the position of the
boundary wire or the guide wire
1.
If the boundary wire or the guide wire is put
into position with stakes, remove the stakes
from the ground.
2.
Carefully remove the boundary wire or the
guide wire from the ground.
3.
Adjust the boundary wire or the guide wire
into a new position.
4.
Put the boundary wire or the guide wire into
To put the wire into
position. Refer to
position with stakes on page 18 or To bury
the boundary wire or the guide wire on page
19 .
3.8 To extend the boundary wire or the
guide wire
Note: Extend the boundary wire or the guide wire
if it is too short for the work area. Use original
spare parts, for example couplers.
1.
Cut the boundary wire or the guide wire with
a pair of wire cutters where it is necessary to
install the extension.
2.
Add wire where it is necessary to install the
extension.
3.
Put the boundary wire or the guide wire into
position.
4.
Put the wire ends into a coupler.
Note: Make sure that you can see the ends
of the boundary wire or the guide wire
through the transparent area of the coupler.
5.
Push the button on the coupler with an
adjustable pliers.
1055 - 001 - 04.02.2019

3.9 To install the wheel brushes

1.
Remove the front top cover. Refer to
remove the front top cover on page 30 .
2.
Remove the rear top cover. Refer to
remove the rear top cover on page 31 .
3.
Remove the wheel brush covers in the front
end of the product. Lift the front-end of the
wheel brush cover and push forward.
4.
Install the front wheel brushes.
To
To
Installation - 19

Advertisement

Table of Contents
loading

Table of Contents