Arrangement And Bolting Of Single And Double Conductor; Arrangement Of The Busbar And Tee-Off Conductor At The Busbar End; Busbar Diagram - ABB UniGear ZS3.2 Instruction Manual

30 UniGear ZS3.2
—
5/15 Arrangement
and bolting of single
and double conductor
busbars with single
and double tee-off
bars. Ensure that
screws and
accessories of the
specified quality are
used! Use 2 dished
washers per screw
—
5/16 Arrangement of
the busbar and
tee-off conductor at
the busbar end
—
5/15
—
5/16
I N S T R U C T I O N M A N U A L
3 Busbar
3.1 Tee-off conductor
3.5 Spacer plate, 15 mm
3.6 Spacer plate, 10 mm
29 Busbar bushing
58 Insulation cover
58.5 Lid of cover
163 M10 socket head bolt
164 M10 nut
165 10 mm dished washer
a) Arrangement for tee-off current up to 1600 A and 1600 A or
3150 A busbar current.
During assembly, cut out the insulation cover and lid to fit
cross-section of the feeder or busbar.
3 Busbar
3.1 Tee-off conductor
3.5 Spacer plate, 15 mm
3.6 Spacer plate, 10 mm
58 Insulation cover
58.5 Lid of cover
163 M10 socket head bolt
164 M10 nut
165 10 mm dished washer
a) Arrangement for 1600 A tee-off current and 1600 A busbar
current.
b) Arrangement for 1600 A tee-off current and 2000 A or 3150 A
busbar current.