Initial Start-Up; Information On Initial Operation; Starting Up; Selecting The Heater At A Later Date - Webasto MultiControl Installation Instructions Manual

5

Initial start-up

5.1

Information on initial operation

WARNING
Inhaling poisonous gases in the enclosed
rooms
Danger of poisoning and suffocation
Never operate the heater (also not with program-
X X
med heating start) in closed rooms such as ga-
rages or workshops that do not have an exhaust
extraction unit.
In workshops with exhaust extraction facilities,
X X
make sure that the exhaust extractor is fully
operational.
5.2

Starting up

3 Heater is correctly installed.
3 Control element is correctly installed.
3
Vehicle on-board power supply is connected to the battery
voltage.
Select heater
Manual heater selection is omitted in the event of
automatic heater detection.
Rotate the control knob and select the installed heater.
Fig. 07: "Heater" menu element
Press the control knob.
X X
Setting the day of the week:
Fig. 08: Day of the week
Rotate the control knob, select weekday.
X X
Fig. 09: Setting the time
MultiControl | SmartControl | UniBox
Mon
Setting the time:
Rotate the control knob, set the hour.
X X
Press the control knob.
X X
Rotate the control knob, set the minutes.
X X
Press the control knob.
X X
Fig. 10: Main menu
When the main menu is displayed, initial start-up is completed.
The selected heater can be changed at a later date.
See "5.3 Selecting the heater at a later date" on
page 7.
5.3

Selecting the heater at a later date

In the event of a Reset, all the settings and timer
programs on the control element are reset to the
default settings or to the values preset by the
technician.
In the event of a Reset, the language is reset to
English.
Select the "Settings" symbol
X X
Fig. 11: "Settings" menu element
Press the control knob.
X X
Select the "Reset" menu element.
X X
Fig. 12: "Reset" menu element
Press the control knob.
X X
Heating
from the main menu.
Settings
Settings
Reset
7