Explanation ■ improper use repair of Webasto heating and Action to be taken ■ repairs not carried out by a Webasto cooling systems can cause fire or Requirement for the following ac- service workshop the leakage of deadly carbon mon- tion ■...
Not all settings can be controlled Press the Push button to start the air- or web app. The ThermoConnect is con- by using the app. More settings are or water heater. nected electrically to the air- or water available in the web service.
■ Connection settings revert back a reminder will be sent to the Fig.2 ThermoConnect status light to default. ThermoConnect mobile app and to user 1. Reset button ■ Removes paired mobile users and E-mail (if given in My WebastoConnect 2. Status light user phone numbers.
7.3 List of supported countries 8 ThermoConnect installation temperature sensor) 8.1 Scope of delivery ThermoConnect will work in the following 6. QR-code labels (2x) countries providing a 2G network is availa- Not illustrated: ble: ■ Velcro stickers (2x) ■ Operating- and Installation Instructions...
Page 6
- Install the ThermoConnect only on The Push button includes a tempera- Installation: flat surfaces to avoid bending of the ■ GPS antenna: ture sensor. Make sure that the air casing. can flow around the Push button, - The text 'GPS' is facing up.
9 Wiring harness installation ness, see Fig.6. Do not connect the Check the wiring of the Control ele- The ThermoConnect can be integrated in ThermoConnect wiring harness sup- ment plug from the heater (Fig.9). Cor- the car system in two ways.
Fig.11 ThermoConnect 16-pin plug Output 2, (0.5 A, same See also Fig.22 Connect the brown wire (pin 1) of the White as supply voltage when ThermoConnect wiring harness ( ) to Pin Colour Description controlled) ground. Brown Pin 31, ground Green...
Attach the other label on Fig.23. - Google Play see Fig.16 Heating still controls ventilation automati- Install the ThermoConnect mobile app 12 Initial start-up cally: the user must not use both heating on the phone. 12.1 Install the app on mobile and ventilation controls simultaneously.
Page 10
Make sure that you have the More than one user may use the back of this operating- and installation ThermoConnect app installed. ThermoConnect. When adding new users instructions (see chapter 11). (see „12.2 Connect the mobile phone“), Step 1 of 4...
14 Technical data Regulation Typ approval number ThermoConnect Hereby, Webasto declares that the radio ECE R10 equipment type ThermoConnect is in com- 10R - 04 0110 Supply voltage +9 V…+32 V pliance with the Directive 2014/53/EU. The stipulations of these regulations are...
Page 15
These are the original instructions. The English language is binding. You can request your language if it is missing. The telephone number of each country can be found in the Webasto service centre leaflet or the website of the respective Webasto representative of your country.
Need help?
Do you have a question about the ThermoConnect and is the answer not in the manual?
Questions and answers