Setting The Time Data; Setting The User Bits - Sony Digital Betacam DVW-700 Operation Manual

4-5 Setting the Time Data

4-5-1 Setting the User Bits

Note
If you are using the time code and the user bits, set the user bits first.
Setting the time code first will cause an error because the time code
generator stops while the user bits are being set.
By setting the user bits (up to hexadecimal 8 digits), you can record user
information such as the date, time, or scene number on the time code
track.
Follow the procedure below to set the user bits.
Illustration : DVW-700 / 700WS (for the NTSC broodcast system)
1
Set the DISPLAY switch to U-BIT.
Setting the user bits
Chapter 4 Adjustments and Settings for Recording
4
(Continued)
4-25