Sony Digital Betacam DVW-700 Operation Manual page 155

3
Press the UP or DOWN button repeatedly to cycle through the
character set until the desired character appears.
If you press the UP button, the character set cycles in the sequence
of space (π), alphabetic characters A to Z, numerals 0 to 9, then
symbols. If you press the DOWN button, the character set cycles in
the opposite direction.
4
Press the MENU CANCEL / PRST / ITEM switch to ITEM to move
the cursor to the next position.
• To end writing the ID, press this switch to ITEM repeatedly until
the cursor reaches the right-most position.
• To continue writing the ID, return to step 3 to select the next
character.
5
Press the MENU CANCEL / PRST / ITEM switch again to ITEM.
The cursor disappears from the ID, and the message "EDIT OK? (Y
: UP, N : DWN)" asking you whether or not to end writing the ID
appears.
Chapter 4 Adjustments and Settings for Recording
Currently set card ID,
or 10 spaces
4
(Continued)
4-89