Table of Contents
Advertisement
5-1 Power Supply
You need to power on the camcorder for the flange focal length
adjustment, viewfinder focus and screen adjustment, etc., which are
described later.
The following power supplies can be used with the camcorder.
• A BP-L60 / L90 lithium-ion battery pack
• An NP-1B / 1A or a BP-90A / 90 Ni-Cd battery pack
• An AC adaptor
Alternatively, you can make combined use of internal and external
batteries, by mounting one of the above batteries as an internal battery
and connecting an external battery that can be a BP-90A / 90 contained
in a DC-210 Battery Adaptor and connected to the DC IN connector of
the camcorder.
5-1-1 Using a BP-L60 / L90 Battery Pack
The camcorder will operate continuously for about 120 minutes with a
BP-L60 battery pack, and for about 180 minutes with a BP-L90 Battery
Pack.
Before use, charge the battery pack with a BC-L100 / L100CE Battery
Charger. It takes about 2.5 hours to charge one BP-L60, and about 3.5
hours to charge one BP-L90.
For more information, refer to the BC-L100 / L100CE manual.
Note on using the battery pack
A warm battery pack may not be able to be fully recharged.
Chapter 5 Setting Up the Camcorder
5
5-1
Hide quick links:
Advertisement
Table of Contents
