1. PREPARATION
Connect the Smart Speaker
for Android™ via a network
cable to your wireless router,
and connect the power supply
as well.
A wired connection to the router
is only necessary during setup.
Turn the power switch to the
on position and press the on/
off button on the front of the
Smart Speaker.
Android is a trademark of Google Inc.
SETUP SMART SPEAKER FOR ANDROID™
2. APP INSTALLATION
The Smart Speaker for
Android™ is based on the
proven Raumfeld by Teufel
streaming technology. In
order to control your Smart
Speaker you will need the
Raumfeld by Teufel App,
available in the Google Play
Store.
Download the Raumfeld by
Teufel App and install it on
your Android™ smartphone
or tablet.
Direct link
to the app
in the
Google
Play Store
3. SETUP
Start the Raumfeld App. A
setup wizard will guide you
through the necessary steps.
Make sure your
smartphone is
wirelessly
connected to the
same network as
the Smart Speaker
for Android™.
In order to connect your
Smart Speaker with your
wireless access point, select
"Connect to Your Personal
Network" in the setup wizard
at the "Connect to Network"
step. Simply select your
wireless network and then
enter the corresponding
password.
Follow the on-screen
instructions to configure the
device and to assign it a room
name.
4. LISTEN TO MUSIC
After completion of the setup
wizard you may remove the
network cable.
In the App, confirm the
prompt if you would like to
share music stored on your
Android™ device.
Switch to "My Music" and
wait a few seconds before
the music collection has been
fully loaded.
Done! Enjoy your new
Smart Speaker for
Android™.
A detailed manual is available
online at:
http://manual.raumfeld.com