Sony DSRPD170 Operating Instructions Manual page 77

Dubbing only desired scenes - Digital program editing
(10)Turn the SEL/PUSH EXEC dial to select "CUT-IN," then press the dial.
(11)Turn the SEL/PUSH EXEC dial to select the average numerical value of CUT-IN,
then press the dial.
The calculated start position for recording is set.
(12)Turn the SEL/PUSH EXEC dial to select "CUT-OUT," then press the dial.
(13)Turn the SEL/PUSH EXEC dial to select the average numerical value of CUT-OUT,
then press the dial.
The calculated stop position for recording is set.
(14)Turn the SEL/PUSH EXEC dial to select
Errors in editing
If you connect your camcorder to Sony equipment with the DV jack, the range of errors
is within +/– 5 frames.
The range may become wider in the following conditions:
•The interval between CUT-IN and CUT-OUT is less than five seconds (p. 78).
•CUT-IN or CUT-OUT is set at the beginning of the tape.
RETURN, then press the dial.
10,11
OTHERS
ED I T SET
ADJ TEST
"CUT–I N" 0
"CUT–OUT"
RETURN
[ MENU ] : END
12,13
OTHERS
ED I T SET
ADJ TEST
"CUT–I N"
"CUT–OUT" 0
RETURN
[ MENU ] : END
OTHERS
ED I T SET
ADJ TEST
"CUT–I N" 0
"CUT–OUT"
RETURN
[ MENU ] : END
OTHERS
ED I T SET
ADJ TEST
"CUT–I N"
"CUT–OUT" 0
RETURN
[ MENU ] : END
77