Sony DSRPD170 Operating Instructions Manual page 122

Superimposing a still image in a "Memory Stick" on a moving
picture – MEMORY MIX
Before operation
Insert a recorded "Memory Stick" and a tape to be recorded into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) Press MEMORY MIX in standby mode.
(3) Press MEMORY+/– or +/– on the Remote Commander to select the still
(4) Turn the SEL/PUSH EXEC dial to select the desired mode.
(5) Press the SEL/PUSH EXEC dial.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
(7) Press START/STOP to start recording.
2
MEMORY MIX
M. CHROM
Still image
122
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
image you want to superimpose.
To see the previous image, press MEMORY – or – on the Remote Commander.
To see the next image, press MEMORY+ or + on the Remote Commander.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM y M. OVERLAP
The still image is superimposed on the moving picture, and your camcorder is
in standby mode.
100-0019 100-0019 100-0019
3
–
4
+
5
6
1
POWER
7
POWER
M. LUMI
100-0019 100-0019 100-0019
M. LUMI I I I • • • •
100-0019 100-0019 100-0019
M. LUMI I • • • • • •
100-0019 100-0019 100-0019