Sony DSRPD170 Operating Instructions Manual page 168

Identifying the parts and controls
Attaching the lens hood for the wide conversion lens only
To attach the hood for the wide conversion lens, screw the hood clockwise, and then
tighten the left hood fixing screw.
Attaching the wide conversion lens
To attach the wide conversion lens, remove the hood, remove the caps of the wide
conversion lens that is attached to the back and front of the lens, then attach the wide
conversion lens. Be sure to screw the lens all the way until it stops.
Notes
•This wide conversion lens is dedicated for the 58-mm-dia filter of the Sony digital
camcorder.
•Do not apply impact to the digital camcorder. Be careful especially when you attach
the conversion lens.
•Attach the cap for the wide conversion lens when storing the wide conversion lens.
•Do not leave the wide conversion lens in high humidity for a long period, as it may
get mold.
•Be careful when you put your camcorder with the conversion lens attached on the
desk. Your camcorder may be unstable.
•Be careful when you remove the MC protector that is attached to the wide conversion
lens. You may be injured. To prevent from injuring, apply a soft cloth to the MC
protector, then release the protector slowly.
168
Lens hood
Wide conversion lens