Sony DSR-PD175P/PD177P Operating Manual page 61

AE SHIFT
You can set an offset value to adjust the
automatic exposure adjustment value
between [-7] (dark) and [+7] (bright) with
the SEL/PUSH EXEC dial. The default
setting is [0]. and selected value
appears on the screen when you change the
value from the default setting.
b Notes
• This function is not effective while you adjust
the iris, shutter speed and gain all manually.
• [AE SHIFT] is canceled when [EXPOSURE] is
manually adjusted.
• This function is not effective when [HYPER
GAIN] is set to [ON].
AE RESPONSE
You can select the speed at which the
automatic exposure adjustment function
follows changes in the brightness of the
subject. You can select a speed from
[FAST], [MIDDLE] and [SLOW]. The
default setting is [FAST].
AT IRIS LMT
You can select the highest iris value for
automatic adjustment from [F11], [F9.6],
[F8], [F6.8], [F5.6], [F4.8] and [F4]. The
default setting is [F11].
b Notes
• This function is not effective during manual iris
adjustment.
FLCKR REDUCE
B ON
Reduces flickering. Flickering of the
screen under a light source such as a
fluorescent lamp will be reduced.
OFF
Does not reduce flickering.
b Notes
• Flickering may not be reduced for certain light
sources.
CNTRST ENHCR
When you set this function to [ON], your
camcorder detects high contrast images,
such as backlit scenes, and automatically
improves underexposed images. The
default setting is [OFF].
b Notes
• When you set [BACK LIGHT] to [ON],
[CNTRST ENHCR] is temporarily disabled.
BACK LIGHT
When you set this function to [ON] (.),
you can correct backlighting. The default
setting is [OFF].
b Notes
• [BACK LIGHT] is set to [OFF] when you set
[SPOTLIGHT] to [ON].
• [BACK LIGHT] is set to [OFF] when
[EXPOSURE] is manually adjusted.
• [BACK LIGHT] is set to [OFF] if at least two of
iris, gain, and shutter speed are adjusted
manually.
• [BACK LIGHT] is set to [OFF] when [HYPER
GAIN] is set to [ON].
SPOTLIGHT
When you set this function to [ON] (
you can prevent overexposure of light
during recording of a subject under strong
light, such as a stage. For example, you can
prevent people's faces from being over-
exposed. The default setting is [OFF].
b Notes
• [SPOTLIGHT] is set to [OFF] when you set
ON
[BACK LIGHT] to [
• [SPOTLIGHT] is set to [OFF] when
[EXPOSURE] is manually adjusted.
• You cannot use the spotlight function if at least
two of iris, gain, and shutter speed are adjusted
manually.
),
].
Continued ,
61