Table of Contents
Advertisement
F White balance
appears during playback of the
movie recorded with the shot transition.
b Notes
• The exposure correction value (0EV), shutter
speed and iris will be displayed during viewing
of still images on "Memory Stick Duo" media.
• Date and time will be displayed in the same area
when you select the date and time display. If
you record without setting date and time, [-- --
----] and [--:--:--] will be displayed.
• An accurate shutter speed may not be displayed
when you play back a tape recorded with your
camcorder on another device. Check the data
code that is displayed on the screen when you
play back the tape on your camcorder for the
accurate shutter speed.
Displaying the settings in your
camcorder (Status check)
You can check the settings of the following
items.
• Audio setup such as microphone volume level
(p. 40, 66)
• Output signal setup (p. 74)
• Functions assigned to the ASSIGN buttons
(p. 41)
• Camera setup (p. 59)
• Optional external recording unit HVR-MRC1 or
HVR-DR60
1
Press the STATUS CHECK button
C.
2
Turn the SEL/PUSH EXEC dial D
until a desired display shows up
on the screen.
When the POWER switch B is set to
CAMERA, the display changes in the
following sequence:
AUDIO t OUTPUT t ASSIGN t
CAMERA t EXT DEVICE (when an
external device is connected)
When the POWER switch B is set to
VCR, the display changes in the
following sequence:
AUDIO t OUTPUT t ASSIGN t
EXT DEVICE (when an external device
is connected)
To hide the display
Press the STATUS CHECK button C.
Checking the remaining battery
(Battery Info)
Set the POWER switch B to OFF (CHG),
then press the DISPLAY/BATT INFO
button E. The approximate recordable
time in the selected format and battery
information appear for about 7 seconds.
You can view the battery information for up
to 20 seconds by pressing the button again
while the information is displayed.
Remaining battery (approx.)
Recording capacity (approx.)
60
65
49
Hide quick links:
Advertisement
Table of Contents
