Displaying The Settings In Your Camcorder (Status Check) - Sony HVR-S270U Operating Manual

appears during playback of the
movie recorded with the iris, gain and
shutter speed manually adjusted.
C Iris
appears in the iris value display
area during playback of the movie
recorded with the iris manually adjusted
to its maximum value.
D Gain
E Shutter speed
F White balance
appears during playback of the
movie recorded with the shot transition
or [MANU WB TEMP].
b Notes
• The exposure correction value (0EV), shutter
speed and iris will be displayed during viewing
of still images on "Memory Stick Duo."
• Date and time will be displayed in the same area
when you select the date and time display. If
you record without setting date and time, [--- --
----] and [--:--:--] will be displayed.
• An accurate shutter speed may not be displayed
when you playback a tape recorded with your
camcorder on another device. Check the data
code that is displayed on the screen when you
play back the tape on your camcorder for the
accurate shutter speed.
• A shutter speed is indicated with [---] during
playback of the movie record in the extended
clear scan (ECS) mode.
Displaying the settings in your
camcorder (Status check)
You can check the settings of the following
items.
• Audio setup such as microphone volume level
(p. 74)
• Output signal setup ([VCR HDV/DV], etc.)
(p. 80)
• Functions assigned to the ASSIGN buttons
(p. 48)
• Camera setup (p. 67)
• External devices
1
Push the MENU/STATUS switch
C to STATUS.
2
Turn the SEL/PUSH EXEC dial D
until a desired display shows up
on the screen.
When the CAMERA/VCR switch E is
set to CAMERA, the display changes in
the following sequence:
AUDIO t OUTPUT t ASSIGN t
CAMERA t EXT DEVICE (when an
external device is connected)
When the CAMERA/VCR switch E is
set to VCR, the display changes in the
following sequence:
AUDIO t OUTPUT t ASSIGN t
EXT DEVICE (when an external device
is connected)
To hide the display
• Push the MENU/STATUS switch C to
STATUS.
59