Sony DSR-400K/400PK Operating Instructions Manual page 88

Page Item
AUTO IRIS 2 IRIS WINDOW
IRIS WINDOW IND
IRIS LEVEL
IRIS APL RATIO
IRIS VAR WIDTH
IRIS VAR HEIGHT
IRIS VAR H POS
IRIS VAR V POS
IRIS SPEED
CLIP HIGH LIGHT
FUNCTION 3 WHT FILTER INH
COLOR BAR SEL
REC TALLY
USER & ALL ONLY
RM COMMON
MEMORY
RM REC START
i.LINK CTL
i.LINK CTL(END)
88
Menu Organization and Operation
Settings Default USER
menu
1/2/3/4/5/VAR 1 –
OFF/ON OFF
(–99 to 99) 0
20 to 465 245
NTSC: 20 to NTSC:
120 72
PAL: 20 to 142 PAL: 85
–452 to 452 0
NTSC: –101 to 0
100
PAL: –122 to
122
(–99 to 99) 0
OFF/ON OFF
OFF/ON OFF –
SMPTE/EBU/ NTSC:
SNG SMPTE
PAL:
EBU
UPPER/BOTH UPPER
OFF/ON OFF
RM/CAM/ RM
PARA
ALL, REC/P, REC/P
OFF
OFF/ON OFF
Description
Selects the auto iris detection
window. VAR is variable.
Turns on and off the function which
displays a frame marker for the auto
iris detection window.
Adjusts level of the auto iris target
value.
Adjusts mix ratio of auto iris detection
peak value and average value.
Adjusts width of detection frame
when the auto iris detection window is
set to VAR.
Adjusts height of detection frame
when the auto iris detection window is
set to VAR.
Adjusts horizontal position of
detection frame when the auto iris
detection window is set to VAR.
Adjusts vertical position of detection
frame when the auto iris detection
window is set to VAR.
Adjusts auto iris speed.
Turns on and off the function which,
during auto iris adjustment, ignores
very bright areas by dulling the
reaction to high luminescence.
Turns on and off the function which
inhibits independent white memory
for each filter position.
Selects color bar type.
Selects whether to light the upper
tally indicator only, or both upper and
lower tally indicators.
Sets to show only USER menu in the
TOP menu.
Selects whether or not to share
settings for when a remote control
unit is connected and when the
camcorder is used alone.
When a remote control unit is
connected, selects which REC
buttons are enabled (Remote control
only, the camcorder only, or both).
Sets the control command output
from the i.LINK DV OUT connector.
See "Settings required for an i.LINK
connection" on page 42.
Selects whether or not to stop the
tape on the external equipment via
the i.LINK cable when the battery of
the camcorder is exhausted.
File
A P R St
–
A P Sc R St
A P
A P Sc R St
A P
A P