Step 4: Connect Conductor App To Aurender And Update Software - Aurender W20 Quick Start Manual

STEP 4: Connect to Aurender & Update Software
1. In the iPad Settings
2. Open the Aurender Conductor app and go to Settings
connect:
3. The first time you connect to the Aurender from the iPad app, you will be prompted to enter a 6-digit
passcode which will be displayed on the Aurender's front panel:
4. Now that you are connected to your Aurender, confirm that your software is up to date by
going to the "Software Upgrade" section of the Conductor Settings Menu. If a software update is
available, you will be prompted to download and then install the software update.
Note: Conductor will temporarily lose connection to the Aurender as the unit reboots during the upgrade
process. Please quit the Conductor app and reopen once the upgrade has completed.
, confirm that your iPad is connected to the correct WiFi network.
- 7 -
> Aurender. Select your Aurender to