STEP 3: UPDATE AURENDER'S SYSTEM
SOFTWARE TO THE LATEST VERSION
1. Turn on the Aurender.
2. Connect the iPad to your wireless access point.
(on your iPad: Settings -> Wi-Fi)
* Make sure your iPad is successfully connected to Wi-Fi
3. Open Aurender Conductor App.
The app will connect to your Aurender automatically if you have only one Aurender.
*You'll need to select the Aurender you want to access if you have more than one unit.
4. Enter the passcode.
The first time you connect the Aurender from the iPad App, you will be prompted to enter the passcode.
The passcode will be shown on the front panel of the Aurender unit.
5. Tap on Settings
After you have entered in the passcode, tap on Settings
below the search bar.
on the upper right-hand side of the app, right
4
- 6 -
5